You can buy all 2D Giclée & Digital Prints at NiboShop on Etsy®
You can now order on demand, or custom order any article from the Light Series (3D OBJECTS).
The "Maze Series" received an Honourable Mention in Creative Review Annual 2020!

All lights are centerpiece sculptures, hand made, numbered & stamped by nibo. They have been tested for a period of 10 years or more and proved to need very little or no maintenance (just the occasional bulb and wire sponging to reshine the copper).

Main body material is precious metal copper, which like silver and gold, is corrosion free (it only becomes darker and lackluster but doesn't lose body mass over time). Other materials used are aluminium, bronze, lead, glass beads, wood, cloth, iron and rubber.
Light pieces  Copper Series
Made of plumbing copper pipe and a half-kilo counterweight, this floor light was especially designed to light a reading chair or a coffee table.

The shade rotates 280 degrees on horizontal and 60 degrees on vertical axle.

This piece NEEDS ASSEMBLING before use (You need to attach the base to the body). Instruction are included in the packaging.
Copper  Series Floor #1
During the photo shoot
During the photo shoot
0.5kg iron counterweight incased in plastic.
0.5kg iron counterweight incased in plastic.
This floor light was also designed as a reading light, perhaps next to an armchair, but it could also highlight a narrow wall or a corner in the room.

The shade rotates 280 degrees on horizontal / 60 degrees on vertical axle and has a blue glass bead in the centre (light shines through when lit).

This piece comes fully assembled & ready to use.
Copper  Series Floor #2
Floor 2
Floor 2
Floor 2
Floor 2
Floor 2 b
Floor 2 b
A  ceiling (hanging) light designed to light coffee tables (single unit) or dinner tables (one or more units). The power switch can be mounted on the power cord or the wall-switch can be used instead.

It uses a max. 40w, inverted (mirrored) light bulb which complements the piece and is very discreet in terms of unwanted light emission (compared to the intended light emission onto the lit surface).

This piece comes fully assembled, with a long cord, which must be connected to the nearest power source by a qualified person.
Copper  Series Ceiling #1
Single unit close up
Single unit close up
Double unit installation. Notice the discreet presence of the lights compared to the light they emit onto the table.
Double unit installation. Notice the discreet presence of the lights compared to the light they emit onto the table.
This light can be mounted on a wall (as a sconce), or rest on a surface (as a table light).

Decorated with amber and crystal beads which allows for a small amount of light to shine through the shade.

This piece comes fully assembled & ready to use.
Copper  Series Tawal #1
Resting on a table
Resting on a table
On the wall
On the wall
On the wall with the shade in various positions
On the wall with the shade in various positions
This ceiling (hanging) light is designed to light coffee tables.

It can be placed under a ceiling fan or in an area where hanging a light from the ceiling is not an option and it will light a substantial area of the room as it is able to move along the power cords as well as on its axle. This large nibo® light piece is always a conversation starter, wherever it is installed.

The power supply is 12V therefore the naked power cables are harmless to the touch.

All Trolley lights are custom made Information regarding the use of the light (dinner or coffee table use) and the hight of the ceiling must be provided.

Due to size, this piece is shipped to GREECE ONLY.
Copper  Series Cieling #2 (Trolley)
At Vanessa's house in Athens GR
At Vanessa's house in Athens GR
In the living room (opposite view).
In the living room (opposite view).
Close up of the shade and the on/off switch.
Close up of the shade and the on/off switch.
The support mechanism and the supply cords.
The support mechanism and the supply cords.
The power adaptor and the power cables anchorage.
The power adaptor and the power cables anchorage.
A very tall and slim wall light with a characteristic power switch. Designed to light up narrow walls and columns.

This piece comes fully assembled, with a long cord, which must be connected to the nearest power source by a qualified person.

If you need the length of the piece to be customized (longer or shorter) according to the hight of the wall or column it will be placed on, please provide the necessary information.

For example, if you want to lit a piece of sculpture on the floor, you must measure the hight of the wall minus the hight of the sculpture. Accordingly, if you want to lit a step, we need to know the hight of the wall.

The bottom end of the light piece should be at a minimum 35cm distance away from the floor, or the object to be lit (we will make the calculation).
Copper  Series Wall #1 (Trumpet)
Partial view
Partial view
Close up of the switch and the shade
Close up of the switch and the shade
Detail of the on/off switch
Detail of the on/off switch
This floor light is tall enough to act as a "guard" perhaps situated in front of a narrow wall or next to an entrance to a room.
The shade rotates 180 degrees on horizontal axle and can be left facing upwards, backward or frontward, as it's using a mirrored bulb wich doesn't blind the eyes when looking directly at it.

This piece comes fully assembled & ready to use.
Copper  Series Floor #3
Floor #3 215cm Hight
Floor #3 215cm Hight
Floor #3 facing outwards
Floor #3 facing outwards
Floor #3 facing inwards
Floor #3 facing inwards
Floor #3 lit
Floor #3 lit
Switch close up
Switch close up
Base close up
Base close up